Preparation of CaO granules using the granulation method

ABSTRACT

Improving the hydration resistance of CaO particle in manufacturing and application of free CaO-containing materials has practical significance. In this study, CaO granules was made from Ca(OH)₂ particles, which were fabricated by the granulation method. The results showed that the hydration resistance of the CaO granules which was prepared under 1700?r?min^?1 was the best, the CaO granules was sintered well in calcination process, the shell of CaO granules was relatively dense, which improves the hydration resistance of CaO granules, and the rate of hydration weight increment was 0.58% after placed in the air for 20 days under a temperature of 10–14°C and a relative humidity of 57–81%.     

Using electroencephalogram to continuously discriminate feelings of personal thermal comfort between uncomfortably hot and comfortable environments

Thermal comfort is an important factor for the design of buildings. Although it has been well recognized that many physiological parameters are linked to the state of thermal comfort or discomfort of humans, how to use physiological signal to judge the state of thermal comfort has not been well studied. In this paper, the feasibility of continuously determining feelings of personal thermal comfort was discussed by using electroencephalogram (EEG) signals in private space. In the study, 22 subjects were exposed to thermally comfortable and uncomfortably hot environments, and their EEG signals were recorded. Spectral power features of the EEG signals were extracted, and an ensemble learning method using linear discriminant analysis or support vector machine as a sub-classifier was used to build the discriminant model. The results show that an average discriminate accuracy of 87.9% can be obtained within a detection window of 60 seconds. This study indicates that it is feasible to distinguish whether a person feels comfortable or too hot in their private space by multi-channel EEG signals without interruption and suggests possibility for further applications in neuroergonomics.     

磺酸基改性聚丙烯酸类增稠剂的性能研究

混凝土增稠剂作为一种混凝土外加剂,可以提高混凝土的工作稳定性,改善混凝土的离析、泌水等问题.利用磺酸基对聚丙烯酸(PAA)类增稠剂进行改性,制备出一种增稠效果优良的增稠剂.利用红外光谱分析仪(FTIR)表征了聚合物结构与成分,研究了改性PAA对水泥浆体流变性能的影响,并通过TOC(总有机碳吸附)、Zeta电位、电导率、DLS(动态光散射)等手段分析了聚合物在水泥颗粒表面的吸附行为以及聚合物在水泥孔溶液中的构象,并据此提出改性PAA的作用机理.结果表明:磺酸基改性PAA会增加掺入聚羧酸减水剂(PCE)浆体的塑性粘度,降低浆体流动度,且磺酸基改性PAA会增大液相中的聚合物构象粒径,有利于增大浆体粘度,另外,长链状的磺酸基改性PAA会提供桥接作用增大水泥颗粒之间的相互作用,增大水泥浆体的塑性粘度.     

信息化环境下冲压工艺与模具设计课程教学设计——以垫圈类零件冲裁模拆装为例

以冲压工艺与模具设计课程中垫圈类零件冲裁模拆装为例,采用任务驱动下的教学做一体化的教学模式,运用任务驱动、演示操作、小组讨论、分组指导等多种教学方法,从教学分析、教学策略、教学实施及教学效果等方面探讨如何运用信息化手段优化冲裁模拆装教学设计,解决教学重难点、提升学生学习的主动性,促进学生职业素养及能力提升,推动教学改革,提高教学效果,以更好地推动课程改革。     

杨泗港快速通道武昌青菱段芦湾湖立交的选型研究

杨泗港快速通道青菱段是杨泗港过江通道江南岸重要的快速疏解道路,既承担快速通过性交通,又承担地方性服务功能。芦湾湖立交为青菱段与城市放射线珞狮南路的重要交通转换枢纽,在节点流量分析基础上,从功能定位方面进行阐述。芦湾湖立交由部分互通立交提升为全互通立交,并根据立交用地等限制因素进行全互通的方案比选,满足现状并适合整体需求和建设标准的立交方案,达到保证交通安全,适应城市发展和交通需求的目的。     

热冲压工艺参数对22MnB5马氏体钢汽车B柱性能影响的有限元模拟

通过有限元仿真软件Autoform分析了热冲压过程中工艺参数的变化对22MnB5马氏体钢B柱起皱、回弹、减薄、马氏体量以及强度的影响。结果表明:22MnB5马氏体钢B柱热冲压最优化工艺参数为加热温度930 ℃,冷却速率80 ℃/s。该工艺参数下,热冲压过程各处均完成马氏体转变,硬度分布均匀,材料减薄率较低,热冲压成形效果好,尺寸精度高,冲压件强度均大于1400 MPa。     

产品族设计与供应商的订单分配关联优化研究

针对统一采购情形下产品族设计与供应商订单分配问题,提出了一个以产品族利润最大为目标,满足产品配置要求、供应商最小订单数量等约束的产品族设计与供应商订单分配关联优化模型,并开发了一种自适应遗传算法对模型进行求解。为了防止由于优化问题中存在的订单等式约束导致算法产生大量不可行的染色体,给出了一种按比例分配订单的染色体编码与解码方法。同时算法设计了自适应的交叉方式与变异方式尽可能避免陷入局部最优解。最后通过一个实例验证了所提优化方法和求解算法的有效性。     

煤炭产业环境保护的路径探讨

煤炭在促进经济的同时也给生态环境带来了严重的影响,采取有效措施减少煤炭产业对环境的污染,具有很重要的现实意义。为改善环境污染问题,分析了煤炭产业的环境保护问题并提出相应的解决措施。分析认为,需在国家、地方政府、企业层面强化生态环境保护;从提升资源配置、促进煤炭产业转型升级、加强创新驱动等方面促进资源合理开发;需通过制度保障提升科研协作的成效,促进煤炭绿色开采及清洁利用。在注重环保的同时,落实环境一体化产业政策,向环境依存度较低、知识密集型方向发展,可促进行业可持续发展。     

不同pH环境下CMS改性纳米铁在异质多孔介质中的迁移

纳米铁在污染土壤和地下水的修复中受到广泛关注。为进一步探究其在多孔介质的迁移行为，本研究采用羧甲基淀粉钠（CMS）对纳米零价铁（nZVI）进行包覆，进行了改性纳米零价铁的沉降试验，测量zeta电位与粒径分布探究其分散性；进行了不同pH条件下改性纳米零价铁在酸洗砂与水洗砂的柱实验，分析了化学异质性与pH对纳米铁在多孔介质迁移的影响。结果表明，CMS包覆纳米铁不仅使纳米颗粒本身稳定，而且还减少其在多孔介质表面沉积，大大提高了迁移性。pH=6～8时，nZVI的zeta电位由18.3mV减小到2.9mV，有效粒径由685nm增大到880nm，稳定性变差；而CMS-nZVI的zeta电位值由-19.7mV增大到-53.5mV，颗粒间静电排斥力增强稳定性变好。经能量色散X射线光谱（EDS）分析，水洗砂表面存在碳、铝、铁等氧化物杂质，这些杂质带有正电荷，会增强与带负电的CMS-nZVI的吸附作用，不利于其迁移；而经过酸洗后的石英砂，其表面杂质大大减少，在pH=8时，CMS-nZVI在酸洗砂最大迁移率为77.0%要好于水洗砂的63.0%。此外较高pH环境有助于增加石英砂介质的表面负电荷，减少颗粒与介质的吸附，促进纳米颗粒的迁移。